• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • CAS No.: WTS
  • Other Names: liquid silicone gel
  • MF: WTS
  • EINECS No.: WTS
  • Place of Origin: Guangdong, China (Mainland)
  • Classification: Other Adhesives
  • Main Raw Material: Silicone
  • Usage: electronic,industrial
  • Brand Name: WTS
  • Model Number: 6503
  • Colour: white / transparent/black/red/gray

Packaging & Delivery

Packaging Details 300ml
Delivery Time within 3~15 days after receipt your L/C or T/T

general purpose fire resistant silicone sealant


1.Strong adhesive strength
2. fast curing
3.suitable for glass, tile, metal, plastic, etc.

Properties and uses:

This is a one-component room temperature curing silicone. Rubber elastomer after curing with sensitive circuits and components to improve reliability, extend service life. Insulation, shock absorption, impact resistance, wide operating temperature range. The glue does not corrode the metal and the plastic etc. Weather resistance, chemical corrosion resistance, cold tolerance, high temperature. In the open air, we use it that may be exempted from UV, ozone, water and the adverse effects of chemicals.

Technical parameters before and after curing:

Checkout Item (Items):

Color

white

Viscosity (25°C CPS)

700~1300

Density (25°C.g/cm)

1.20±0

Fixture Time(min ,25°C)

15~30 

Full Cured (25°C)

24 

Shore Hardness (Shore A)

20~50 

Tensile Strength(MPa)

25~50

Lap Shear Strength(MPa)

3.5±0.2

Divulsion Tensility(%)

200~300

Peel off Intensity(N/mm)

>8

Service Temperature Range(°C)

-60~300

Volume Resistivity(Ωcm)

≥1.0×101

Puncture Intensity (kv.mm)

≥27

Dielectric Constant (1.2MHZ)

2.9

Compression Resistance(pressurize)MPa

10

We must ensure that the surface coating or surface of the material clean and remove rust, gray point, and oil, will be pushed glue has been cleaned surface, and than Sticky face closure will be a fixed place in the air, let it solidify naturally. Let it be solidified from the surface to within which is within the solidification process, within 24 hours (room temperature 25 and humidity 55%) and cured 2-4mm depth,.If the site location is deeper, especially in the non- easy contact to the site of the air, completely curing time will be extended. If the temperature is lower, curing time will be extended. In the next step before processing or adhesiving components, it is recommended users waiting long time enough so that the bonding solid and integrity are not affected.

Operation is complete, unused plastic cap should be tightened immediately, kept under seal, again, if the seal has a little crust can be removed, does not affect normal use.

This product is a non-dangerous goods, but not imported and eyes.

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Trading Company
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $26,000
Learn More